WHAT TO LOOK FOR IN A GUN SAFE
The safe you buy should come equipped with heavy duty linkage that is capable of withstanding tremendous amounts of torque through the handle without damaging the lock system or shear pins.
Don’t be impressed with multiple locking pins. The heart of the locking system and how it is protected is much more important.
Make sure the hard plate is not directly welded to the door. It is very important that your raised mounting plate be made in a fashion where it is welded firmly to the door and the hard plate slips in between the mounting plate and the surface of the door.
Buying Guide of a Gun Safe
The combination box is then bolted to the mounting plate. Welds to the mild steel are many times stronger than are welds to hard plate.
To help avoid moisture problems, your safe should be made in a fashion that will allow weather stripping around the door. Fire safes should come equipped with a fire gasket.
When buying a FIRE RESISTANT gun safe, be certain that the fire insulation used is of a very high quality, such as ceramic. Avoid safes with dead air spaces. Safes using ceramic blanket or bulk ceramic pressed right up against the wall of the safe is a far better method of insulating.
Safes with fully recessed doors give better protection against pry bars and porta-powers. Be sure your safe has heavy exterior wall that is at least 1/8″ thick for burglary protection. The fire liner should be U.L. listed ceramic fiber insulation material, not sheet rock or fire board.
It has to have at least a two-inch-thick fire liner encased in a second layer of steel inside the safe. The door must have a clamping action while the gun safe’s dead bolts are being engaged. You should be able to put a tremendous amount of pressure on the handle shaft itself without twisting or snapping anything on the inside of the door.
If you are choosing to fly, however, some stricter rules may apply. As you check the gun locker or safe to make sure you’re getting the right gun for your excursion, make sure to keep everything secure, both in and out of the safe itself.
TSA requires that all firearms must be declared to the airline during check-in at the ticket counter. Any gun or part of a gun must be declared beforehand, so as to avoid complications at security. The TSA also requires that those traveling with firearms must have all guns unloaded.
It is also important to note that, much like storing your gun safely in the gun safe at home, one must have their firearm in a hard-shelled case that is locked. Ammunition is required to be carried in a fiber, wood, or metal box or other package that is specially designed to carry small amounts of ammo in addition to the firearm.
Last Few Words
The safe bodies should have a one-piece wrap around with no vertical seams including the door seat. Your combination box mounting surface should be welded to the door first, then the hard plate should be able to slip in between.
To see more about firearms and hunting with proper safety, you can check out this website. We are here giving you the information of gun safe to help you with better protection. Your independent re-lock should be protected behind the hard plate.